Driving and parking, Driving – Mercedes-Benz SLK-Class 2012 Owners Manual User Manual
Page 138
the accelerator pedal, the engine starts
automatically and the braking effect of the
HOLD function is deactivated. Depress the
accelerator pedal carefully, as the engine
must be started first.
i
If you shift the transmission from R to D,
the ECO start/stop function is available
again once the ¤ symbol reappears in
the multifunction display.
i
Automatic engine switch-off can take
place a maximum of three times
consecutively. The automatic engine
switch-off is then available again after the
border of the ECO symbol appears in the
multifunction display.
Automatic engine start
The engine starts automatically if:
R
you deactivate the ECO start/stop function
by pressing the ECO button.
R
you switch to drive program S or M.
R
you depress the accelerator pedal.
R
the vehicle starts to roll.
R
the brake system requires this.
R
the system detects moisture on the
windshield when the air-conditioning
system is switched on.
R
the charge level of the battery is too low.
R
the driver's seat belt is removed or the
driver's door is opened.
R
you shift the transmission from position D
to R.
R
you engage reverse gear R.
R
you release the brakes when in
transmission position D or N and when the
HOLD function is not active.
R
you steer the vehicle.
i
Shifting the transmission to position P
does not start the engine.
Deactivating/activating the ECO start/
stop function
Example: ECO button
i
If indicator lamp ; is off, the ECO start/
stop function has been deactivated
manually or as the result of a malfunction.
The engine will then not be switched off
automatically when the vehicle stops.
i
Each time the engine is started, the ECO
start/stop function switches to the status
(on or off) that was selected before
switching off the engine.
Deactivating
X
Press button : in drive program C.
or
X
Switch to drive program S or M
(
Y
page 142).
Indicator lamp ; on button : and the
¤ symbol in the multifunction display go
out.
The
Stop/Start active
or
Stop/Start
inactive
message in the AMG menu in the
multifunction display goes out.
Activating
X
Press button :.
Indicator lamp ; lights up. If drive
program S or M is active, the automatic
transmission switches to drive program C.
If all conditions for automatic engine
switch-off (
Y
page 135) are fulfilled, the
¤ symbol is shown in the multifunction
display. In addition, the
Stop/Start
136
Driving
Driving
and
parking