On-board comput er and display s, Menus and submenus – Mercedes-Benz SLK-Class 2012 Owners Manual User Manual
Page 197
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Convenience
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Belt Adjustment
function.
You will see the selected setting:
on
or
off
.
X
Press the a button to save the setting.
Switching the fold-in mirrors when
locking feature is on/off
If you switch on the
Fold Mirrors in when
Locking
function, the exterior mirrors fold in
when you lock the vehicle. If you unlock the
vehicle and then open a door, the exterior
mirrors fold out again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door (
Y
page 99), they will not fold out
automatically. The exterior mirrors can then
only be folded out using the button on the
door.
X
Press the = or ; button on the
steering wheel to select the
Settings
menu.
X
Press the : or 9 button to select the
Convenience
submenu.
X
Press the a button to confirm.
X
Press the : or 9 button to select the
Fold mirrors in when locking:
function.
You will see the selected setting:
Enabled
or
Disabled
.
X
Press the a button to save the setting.
Restoring the factory settings
For safety reasons, the
Daytime Running
Lights:
function in the
Lights
submenu is
only reset when the vehicle is stationary.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Factory Setting
submenu.
X
Press the a button to confirm.
The
Reset All Settings?
message
appears.
X
Press the : or 9 button to select
No
or
Yes
.
X
Press the a button to confirm the
selection.
If you select
Yes
, the multifunction display
shows a confirmation message.
AMG menu in AMG vehicles
AMG displays
X
Press the = or ; button on the
steering wheel to select the
AMG
menu.
:
Digital speedometer
;
Gear indicator
=
Upshift indicator
?
Engine oil temperature
A
Coolant temperature
B
Status display of the ECO start/stop
function (
Y
page 135)
Upshift indicator
UP
= indicates that the
engine has reached the overrevving range
when in the manual gearshift program.
Upshift indicator
UP
= fades out other
messages until you have shifted up.
Menus and submenus
195
On-board
comput
er
and
display
s
Z