Resetting the side windows, Opening/closing, Side windows – Mercedes-Benz GL-Class 2012 Owners Manual User Manual

Page 94

Advertising
background image

If potential danger exists, proceed as follows:

R

Release the & button to stop the closing
procedure. To open, press and hold the
% button. To continue the closing
procedure after making sure that there is
no danger of anyone being harmed by the
closing procedure, press and hold the
& button.

Vehicles with KEYLESS-GO:

R

Release the lock button on the outside door
handle to stop the closing procedure.

R

Immediately pull on the same outside door
handle and hold firmly. The door windows
and the sliding sunroof will open for as long
as the door handle is held but the door is
not opened.

Using the SmartKey

i

The SmartKey must be close to the

driver's door handle.

X

Point the tip of the SmartKey at the driver's
door handle.

X

Press and hold the & button until the
side windows and the sliding sunroof are
fully closed.

X

Make sure that all the side windows and the
sliding sunroof are closed.

X

To interrupt convenience closing:

release the & button.

Using KEYLESS-GO

The KEYLESS-GO key must be outside the
vehicle. All the doors must be closed.

X

Keep locking button : on the door handle
pressed until the side windows and the
sliding sunroof are fully closed.

X

Make sure that all the side windows and the
sliding sunroof are closed.

X

To interrupt convenience closing:

release locking button : on the door
handle.

Resetting the side windows

You must reset each side window if:

R

the battery has been disconnected or has
become discharged.

R

the side window opens again slightly after
being closed fully.

R

the side window can no longer be fully
opened or closed.

X

Close all the doors.

X

Turn the SmartKey to position

1 or 2 in the

ignition lock.

X

Pull the corresponding switch on the door
control panel until the side window is
completely closed. (

Y

page 90)

X

Hold the switch for an additional second.

If the side window opens again slightly:

X

Immediately pull the corresponding switch
on the door control panel until the side
window is completely closed (

Y

page 90).

X

Hold the switch for an additional second.

X

If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly.

92

Side windows

Opening/closing

Advertising
This manual is related to the following products: