Adjusting the head restraints, Folding the front-seat backrests forward/back, Adjusting the four-way lumbar support – Mercedes-Benz C-Coupe 2012 Owners Manual User Manual

Page 93: Seats, steering wheel and mirrors, Seats

Advertising
background image

?

Seat fore-and-aft adjustment

A

Backrest angle

Adjusting the head restraints

Adjusting the head restraint height

electrically

X

To adjust the head restraint height: slide

the switch for head restraint adjustment
(

Y

page 90) up or down in the direction of

the arrow.

Folding the front-seat backrests

forward/back

Important safety notes

G

WARNING

The seat belts can only provide protection if
the seat backrest is locked in the upright
position. The seat backrest must therefore be
locked in the upright position during the
journey. Do not drive the vehicle if the seat
backrest is not locked in the upright position.
If the

Lock Seat Backrest Front Right

or

Lock Seat Backrest Front Left

warning message is displayed in the
multifunction display, then the corresponding
seat backrest is not locked. Carefully slow
down and drive with caution to an area which
is a safe distance from the road. Always
ensure that there is sufficient space behind
the seat backrest and fold the seat backrest
back fully until it engages in the locking
mechanism.
The warning message is no longer displayed
once the seat backrest engages in the locking
mechanism. If both seat backrests are locked
and the warning message continues to be
displayed, have the system checked by a
Mercedes-Benz Center without delay.

G

WARNING

Always ensure that no-one can become
trapped or injured by the movement of the
seat. In a potentially hazardous situation, the
procedure can be interrupted by moving the
seat adjustment switch in the door control
panel or by operating one of the position
buttons of the Memory function.

Folding the backrest forwards

The seat moves forwards if you have folded
the backrest forwards and the seat is in the
rear half of the range. This makes it easier for
passengers to get into and out of the rear
compartment. The head restraint is lowered
simultaneously.

X

Pull seat release handle : forwards and
fold the backrest forwards as far as it will
go.
The seat automatically moves to the
foremost position and the head restraint is
lowered.

Folding back the backrest

X

Swing back the seat backrest.
The seat moves automatically to the stored
position.

Adjusting the four-way lumbar

support

You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.

Seats

91

Seats, steering wheel and mirrors

Z

Advertising
This manual is related to the following products: