Mercedes-Benz GLK-Class 2011 Owners Manual - Manual (Page 113)

X Insert the new bulb into bulb holder ;.
Lug = of the bulb must be pointing
upward.
X Insert bulb holder ;.
X Push the handle of bulb holder ; in the
opposite direction from the arrow until
holder ; engages.
X Align housing cover : and turn it
clockwise until it engages.
X Left-hand headlamp: fasten the washer
fluid reservoir (
Y page 110).
X Install the headlamp cover ( Y page 109).
Standing lamps/parking lamps
X Switch off the lights.
X Open the hood.
X Remove the headlamp cover ( Y page 109).
X Left-hand headlamp: detach the washer
fluid reservoir (
Y page 110).
X Turn housing cover : counter-clockwise
and pull it out.
X Pull out bulb holder ;.
X Take the bulb out of bulb holder ;.
X Insert the new bulb into bulb holder ;.
X Insert bulb holder ;.
X Align housing cover : and turn it
clockwise until it engages.
X Left-hand headlamp: fasten the washer
fluid reservoir (
Y page 110).
X Install the headlamp cover ( Y page 109).
Turn signal lamps/side marker lamps
X Switch off the lights.
X Open the hood.
X Remove the headlamp cover ( Y page 109).
X Left-hand headlamp: detach the washer
fluid reservoir (
Y page 110).
X Turn bulb holder : or ; counter-
clockwise and pull it out.
X WY 5 W (turn signals and side marker
lamps): pull the bulb out of bulb holder :.
X PY 21 W (turn signals): turn the bulb
counter-clockwise, applying slight
pressure, and remove it from bulb
holder ;.
X WY 5 W (turn signals and side marker
lamps): insert the new bulb into bulb
holder :.
X PY 21 W: insert the new bulb into bulb
holder ; and turn it clockwise while
applying slight pressure.
X Insert bulb holder : or ; and turn it
clockwise.
Changing bulbs
111
Lights and windshield wipers
BA 204.9 USA, CA Edition A 2011; 1; 6, en-US
d2mwents
Version: 3.0.3.6
2010-06-15T08:58:39+02:00 - Seite 111
Z