Lights and windshield wipers, Changing bulbs – Mercedes-Benz G-Class 2011 Owners Manual User Manual

Page 101

Advertising
background image

X

Take bulb C out of bulb holder B.

X

Insert the new bulb into bulb holder B.

X

Insert bulb holder B into headlamp = and
turn it clockwise to the stop.

X

Insert headlamp =.

X

Replace and tighten screws ?.

X

Position cover ;.

X

Replace and tighten screws :.

Turn signal

X

G 55 AMG: release the turn signal

protection grille from the rear of the
bracket and fold it forward.

!

Make sure that the headlamp protection

grille does not strike against painted
surfaces.
You could otherwise damage the
paintwork.

X

Switch off the lights.

X

Remove screws :.

X

Remove lens ;.

X

Lightly press bulb =, turn it counter-
clockwise and pull it out.

X

Insert the new bulb and, applying slight
pressure, turn it clockwise until it engages.

X

Install lens ;.

X

Replace and tighten screws :.

!

Do not fasten the screws too tightly. You

could otherwise damage the lens.

X

G 55 AMG: fold the headlamp protection

grille back and engage it into the bracket.

Side marker lamp

The bulbs of the front and rear side marker
lamps are changed in the same way.

Front side marker lamp (example)

X

Switch off the lights.

X

Remove screws :.

X

Remove housing ;.

Changing bulbs

99

Lights and windshield wipers

Z

Advertising