Flat tire, Preparing the vehicle, Changing a wheel and mounting the spare wheel – Mercedes-Benz G-Class 2011 Owners Manual User Manual

Page 234: Repair or change the faulty wheel as necessary, If necessary, change a wheel, Roadside assistance

Advertising
background image

Flat tire

Preparing the vehicle

X

Stop the vehicle as far away as possible
from traffic on solid, non-slippery and level
ground.

X

Switch on the hazard warning lamps.

X

Apply the parking brake.

X

Bring the front wheels into the straight-
ahead position.

X

Move the selector lever to

P.

X

Switch off the engine.

X

Remove the SmartKey from the ignition
lock.

X

All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.

X

Make sure that no one is near the danger
area while a wheel is being changed.
Anyone who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.

X

Get out of the vehicle. Pay attention to
traffic conditions when doing so.

X

Close the driver's door.

Changing a wheel and mounting the

spare wheel

Important safety notes

G

Warning!

If the spare tire is more than 6 years old or is
not the same model as the regular tires, have
the spare tire replaced with a new tire at the
nearest Mercedes-Benz Center.
Never operate the vehicle with more than one
spare wheel mounted.

G

Warning

G 55 AMG:
Rim and tire sizes are different for the spare
wheel and the normal wheel. With the spare
wheel mounted, handling is impaired.

Do not exceed a maximum speed of
50 mph(80 km/h).

Preparing the vehicle

X

Prepare the vehicle as described
(

Y

page 232).

G

Warning!

You must remove the spare wheel from the
spare wheel carrier before lifting the vehicle.
Otherwise the vehicle could fall off the jack
and injure you or others.

X

Remove the vehicle tool kit and the jack
(

Y

page 229).

X

Remove the spare wheel from the spare
wheel bracket (

Y

page 230).

i

Vehicles without an emergency spare

wheel/spare wheel are not equipped with
a wheel-changing tool kit at the factory. For
more information on which tools are
required to perform a wheel change on your
vehicle e.g. lug wrench or jack, consult an
authorized Mercedes-Benz Center.

Securing the vehicle to prevent it from

rolling away

X

Secure the vehicle to prevent it from rolling
away.
On level ground: place chocks or similar

items under the front and rear of the wheel
that is diagonally opposite to the wheel you
wish to change.

X

On downhill gradients: place chocks or

similar items behind both wheels of the
other axle.

G

Warning

Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.

232

Flat tire

Roadside Assistance

Advertising