Only), Operation, Engine compartment – Mercedes-Benz SLK-Class 2010 Owners Manual User Manual

Page 196

Advertising
background image

X

Slowly insert oil dipstick : fully into the
dipstick guide tube.

X

Pull out oil dipstick : again after
approximately 3 seconds to obtain
accurate reading.

The oil level is correct when it is between
lower (min) mark = and upper (max)
mark ; of oil dipstick :.

i

The filling quantity between the upper and

lower marks on the oil dipstick is
approximately 2.1 US qt. (2.0 l).

X

If necessary, add engine oil.

For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
(

Y

page 300).

For information on messages in the
multifunction display concerning engine oil,
see the “Practical hints” section
(

Y

page 250).

Checking engine oil level with the

control system

On the SLK 55 AMG you can check the engine
oil level with the control system.

X

Switch on the ignition.
The standard display appears in the
multifunction display (

Y

page 96).

X

Press button * or & on the
multifunction steering wheel repeatedly
until the following message appears in the
multifunction display:

One of the following messages will
subsequently appear in the multifunction
display:

R

Engine Oil Level

OK

R

Add 1.0 qt. (Canada: 1.0 liter)

to reach max. oil level.

R

Add 1.5 qts. (Canada: 1.5 liters)

to reach max. oil level.

R

Add 2.0 qts. (Canada: 2.0 liters)

to reach max. oil level.

i

If you want to interrupt the checking

procedure, press button * or & on
the multifunction steering wheel.

X

If necessary, add engine oil.

For more information on engine oil, see
“Fuels, coolants, lubricants etc.”
(

Y

page 300).

Other display messages
If the ignition is not switched on, the following
message appears in the multifunction
display:
Turn on ignition

to see engine oil level.

X

Switch on the ignition.

If you see the message:

Observe

Waiting Time

X

If the engine is at operating temperature,
wait 5 minutes before repeating check
procedure.

X

If the engine is not at operating
temperature yet, you must wait 30 minutes
before checking oil.

If you see the message:

Cannot check engine oil level

with engine on.

X

Turn off the engine.

X

If the engine is at operating temperature,
wait 5 minutes before checking oil.

X

If the engine is not at operating
temperature yet, you must wait 30 minutes
before checking oil.

194

Engine compartment

Operation

171_AKB; 3; 60, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-11T16:00:23+02:00 - Seite 194

Advertising