Memory function, Notes, Storing positions into memory – Mercedes-Benz SLK-Class 2010 Owners Manual User Manual

Page 72: Recalling positions from memory, Lighting, Controls in detail

Advertising
background image

Calling up the parking position

X

Switch on the ignition.

X

Press button ;, to select the passenger-
side exterior rear view mirror.

X

Shift the automatic transmission into
reverse gear

R (manual transmission to

reverse gear).
The passenger-side exterior rear view
mirror moves to the stored parking
position.

The passenger-side exterior rear view mirror
returns to its previously stored driving
position

R

10 seconds after you have put the gear
selector lever out of reverse gear

R (manual

transmission out of reverse)

R

immediately once your vehicle exceeds a
speed of approximately 6 mph (10 km/h)

R

immediately when you press button : to
select the driver’s side exterior rear view
mirror

Memory function

Notes

With the memory function you can store up
to three different configurations per front
seat.
Each memory position button on the driver’s
side can store all of the following settings:

R

Seat position

R

Steering wheel position

R

Exterior rear view mirrors’ position

G

Warning!

Do not activate the memory function while
driving. Activating the memory function while
driving could cause the driver to lose control
of the vehicle.

Each memory position button on the
passenger side can store the setting of the
seat position.

Storing positions into memory

X

Adjust the seats.

X

On the driver’s side, also adjust the
steering wheel and exterior rear view
mirrors to the desired positions.

X

Press memory button

M once and within

3 seconds press memory position button
1, 2 or 3.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.

Recalling positions from memory

X

Press and hold desired memory position
button

1, 2 or 3 until the seat has moved

to the stored position completely. On the
driver’s side, also wait for the steering
wheel and exterior rear view mirrors to
move to the stored position.

i

Releasing the memory position button

stops movement to the stored positions
immediately.

Lighting

Notes

i

If you drive in countries with left-hand

driving, you must have the headlamps
modified for symmetrical low beams.

70

Lighting

Controls in detail

171_AKB; 3; 60, en-US
d2ureepe,

Version: 2.11.8.1

2009-05-11T16:00:23+02:00 - Seite 70

Advertising