Mercedes-Benz GL-Class 2010 Owners Manual - Manual (Page 142)

X Move the selection marker with button
W or X to the Comfort submenu.
X Press button & or * repeatedly until
the message
Belt Adjustment appears in
the multifunction display.
The selection marker is on the current
setting.
X Press button W or X to active (On) or
deactivate (
Off) the seat belt adjustment
feature.
Switching fold-in function for exterior
rear view mirrors on or off
Use this function to set the exterior rear view
mirrors to be folded in automatically when
you lock your vehicle.
With this function set to
On and the exterior
rear view mirrors folded in using the button
on the door control panel (
Y page 95), the
exterior rear view mirrors will not fold out
when you switch on the ignition. You will then
have to fold out the exterior rear view mirrors
using the button on the door control panel
(
Y page 95).
Make sure both exterior rear view mirrors are
folded out completely before driving off.
X Press button V or U repeatedly until
the
Settings menu appears in the
multifunction display.
X Press button &.
X Move the selection marker with button
W or X to the Comfort submenu.
X Press button & or * repeatedly until
the message
Fold In Mirrors When
Locking appears in the multifunction
display.
The selection marker is on the current
setting.
X Press button W or X to switch the
function
On or Off.
Vehicle configuration menu
Use the Vehicle configuration menu to
activate/deactivate the Distance warning
function (
Y page 140) or to set the DSR
speed ( Y page 141).
Distance warning function
In vehicles equipped with Distronic, you can
determine whether the distance warning
function is to be enabled or disabled. With this
function set to
On, the system will alert you
when recognizing a stationary obstacle or a
slower vehicle moving in your vehicle’s path
and the danger of a collision exists, even
when the Distronic is switched off.
X Press button V or U repeatedly until
the
vehicle configuration menu appears
in the multifunction display.
X Press button & or * repeatedly until
the message
Distance Warning appears
in the multifunction display.
The selection marker is on the current
setting.
X Press button W or X to switch the
distance warning function
On or Off.
140
Control system
Controls in detail
X164_AKB; 5; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 140