Mercedes-Benz GL-Class 2010 Owners Manual - Manual (Page 335)

X Insert a suitable object such as a coin into
the slot of lock :.
X Turn lock : by 90° in direction of the
arrow.
X Remove cover ;.
Replacing bulbs
Example illustration: LED rear lamp driver’s side
:
Backup lamp bulb socket
; Rear fog lamp bulb socket (driver’s side
only)
X Depending on which bulb needs to be
replaced, turn the respective bulb socket
counterclockwise.
X Pull the bulb socket out of the housing.
X Backup lamp bulb :: Gently press onto
the bulb and turn it counterclockwise out
of its bulb socket.
X Gently press the new bulb into its bulb
socket and turn it clockwise until it
engages.
X Rear fog lamp bulb ;: Pull the bulb out
of its bulb socket.
X Gently press the new bulb into its bulb
socket.
X Align the bulb socket and turn it clockwise.
X Make sure the bulb socket is attached
properly.
X Close the respective cover in the cargo
compartment.
X Close the tailgate.
License plate lamps
X Loosen screws : of lamp cover to be
removed.
X Remove lamp cover ;.
X Replace the bulb.
X Reinstall lamp cover ;.
X Retighten screws :.
Adjusting headlamp aim
:
V Vertical centerline
;
H Horizontal mounting height, measured
from the center
Replacing bulbs
333
Practical hints
X164_AKB; 5; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 333
Z