Mercedes-Benz G-Class 2010 Owners Manual - Manual (Page 263)

Model Capacity Fuels, coolants,
lubricants, etc.
Brake system All models 0.87 US qt (0.82 l) MB Brake Fluid
(DOT 4+)
Cooling system G 550 approx. 12.8 US qt (12.1 l) MB 325.0
Anticorrosion/
Antifreeze
G 55 AMG approx. 13.4 US qt (12.7 l)
Fuel tank G 550 25.4 US gal (96.0 l) Premium unleaded
gasoline (Minimum
Posted Octane 91
[Avg. of
96 RON/86 MON])
G 55 AMG 25.1 US gal (95.0 l)
Fuel tank
reserve
All models approx. 5.3 US gal (20.0 l)
Air
conditioning
system
All models — R134a refrigerant
and special
PAG lubricant oil
(never R 12)
Washer system
and headlamp
cleaning
system
All models 7.9 US qt (7.5 l) MB Windshield
Washer
Concentrate
25
( Y page 265)
Washer fluid mixing
ratio (
Y page 265)
Approved engine oils
Engine oils are specifically tested for their
suitability in our engines and durability for our
service intervals. Therefore, only use
approved engine oils and oil filters required
for vehicles with the Maintenance System.
For a listing of approved engine oils and oil
filters, contact an authorized Mercedes-Benz
Center or visit
www.mbusa.com (USA only).
! Using engine oils and oil filters of a
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by the
Maintenance System will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty.
Please follow Maintenance System
recommendations for scheduled oil
changes. Failure to do so will result in
engine or emission control system damage
not covered by the Mercedes-Benz Limited
Warranty.
Mercedes-Benz recommends MOBIL OIL.
Use the table below to determine the
MB sheet number.
Model Engine,
type
MB sheet
number
G 550 273 229.5
G 55 AMG 113 229.5
25 Mixed with water or commercially available premixed washer solvent/antifreeze.
Fuels, coolants, lubricants, etc.
261
Technical data
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 261
Z