Rear seat head restraints, Multicontour seat, Controls in detail – Mercedes-Benz G-Class 2010 Owners Manual User Manual
Page 70: Seats
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint in such a way that it
is as close to the head as possible and the
center of the head restraint supports the back
of the head at eye level. This will reduce the
potential for injury to the head and neck in the
event of an accident or similar situation.
With a rear seat occupied, make sure to move
the respective head restraint up from the
lowest non-use position and have the
occupant adjust the head restraint properly.
Do not drive the vehicle without the seat head
restraints installed when the rear seats are
occupied. Head restraints are intended to
help reduce injuries during an accident.
Rear seat head restraint height
adjustment
X
Raising: Pull head restraint upward to the
desired position.
X
Lowering: Push head restraint downward
to the desired position.
Rear seat head restraints, removing
and installing
X
Removing: Pull out the head restraint with
both hands.
i
The head restraint(s) should be stored in
a secure place.
X
Installing: Insert the head restraint into
openings on the seat backrest.
X
Push the head restraint down to the stop.
X
Adjust the head restraint to the desired
position.
The multicontour seat has a movable seat
cushion and inflatable air cushions built into
the seat backrest to provide additional
lumbar and side support.
The seat cushion depth, seat backrest
cushion-height and curvature can be
continuously varied with switches on the
inside of each front seat when the ignition is
switched on.
68
Seats
Controls in detail
463_AKB; 3; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-16T20:59:56+02:00 - Seite 68