Controls in detail, Driving and parking – Mercedes-Benz E-Coupe 2010 Owners Manual User Manual

Page 102

Advertising
background image

You can start your vehicle without the
SmartKey in the starter switch using the
KEYLESS-GO start/stop button.
The SmartKey must be located in the vehicle.

KEYLESS-GO start/stop button
:

USA only

;

Canada only

X

Make sure the KEYLESS-GO start/stop
button is inserted in the starter switch
(

Y

page 78).

i

To start the engine with the SmartKey

instead of the KEYLESS-GO function,
remove the KEYLESS-GO start/stop button
from the starter switch. Proceed as
described in “With SmartKey” (

Y

page 99).

X

Depress the brake pedal during the starting
procedure.

X

Do not depress the accelerator pedal.

X

Press the KEYLESS-GO start/stop button
once.
The engine starts automatically.

Starting difficulties

!

Remember that extended starting

attempts can drain the battery.

The engine does not start. You can hear

the starter.
There could be a malfunction in the engine
electronics or in the fuel supply system.

Carry out the following steps:

X

If you are starting the engine with the
SmartKey: Turn the SmartKey in the starter
switch to position

0 and repeat the starting

procedure.

X

If you are starting the engine with KEYLESS-
GO: Close any doors that may be open to
allow for better detection of the SmartKey.

or

X

Remove the KEYLESS-GO start/stop
button from the starter switch.

X

Start the engine with the SmartKey as radio
signals from another source may be
interfering with the KEYLESS-GO function.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The engine does not start. You cannot

hear the starter.
The battery may not be charged sufficiently.

X

Get a jump start (

Y

page 285).

If the engine will not start despite a jump
start:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The starter has been exposed to excessive
temperatures.

X

Let the starter cool for about 2 minutes.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

100

Driving and parking

Controls in detail

207_AKB; 2; 35, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-17T07:10:21+02:00 - Seite 100

Advertising