Approved engine oils, Technical data” section, Technical data – Mercedes-Benz E-Coupe 2010 Owners Manual User Manual
Page 304: Fuels, coolants, lubricants, etc

Model
Capacity
Fuels, coolants,
lubricants, etc.
Cooling system E 350
approx. 8.9 US qt (8.4 l)
MB 325.0
Anticorrosion/
Antifreeze
E 550
approx. 8.0 US qt (7.6 l)
Fuel tank
All models
17.4 US gal (66.0 l)
Gasoline engine:
Premium unleaded
gasoline (Minimum
Posted Octane 91
[Avg. of
96 RON/86 MON])
Fuel tank
reserve
All models
approx. 2.1 US gal (8.0 l)
Air
conditioning
system
All models
—
R134a refrigerant
and special
PAG lubricant oil
(never R 12)
Washer system
and headlamp
cleaning
system
All models
3.1 US qt (3.5 l)
MB Windshield
Washer
Concentrate
23
Washer fluid mixing
ratio (
Approved engine oils
Engine oils are specifically tested for their
suitability in our engines and durability for our
service intervals. Therefore, only use
approved engine oils and oil filters required
for vehicles with the Maintenance System.
!
Using engine oils and oil filters of a
specification other than those expressly
required for the Maintenance System, or
changing of oil and oil filter at change
intervals longer than those called for by the
Maintenance System will result in engine or
emission control system damage not
covered by the Mercedes-Benz Limited
Warranty.
Please follow Maintenance System
recommendations for scheduled oil
changes. Failure to do so will result in
engine or emission control system damage
not covered by the Mercedes-Benz Limited
Warranty.
Use the table below to determine the
MB sheet number.
Model
Engine,
type
MB sheet
number
E 350
272
229.5
E 550
273
229.5
i
MB sheet numbers are printed on the
outside of oil containers.
23
Mixed with water or commercially available premixed washer solvent/antifreeze.
302
Fuels, coolants, lubricants, etc.
Technical data
207_AKB; 2; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 302