Mercedes-Benz C-Class 2009 Owners Manual - Manual (Page 147)

Control system
145
Settings menu
Introduction
In the Settings menu there are two
functions: The function Factory Setting
(
Y page 145), with which you can reset all the
settings to the original factory settings and a
collection of submenus (
Y page 145) with
which you can make individual settings for
your vehicle.
Resetting to factory settings
You can reset most of the functions of the
submenus to the factory settings.
For safety reasons, the function Daytime
Running Lamps in the Lights submenu
cannot be reset while driving.
X Press ( or & to select the
Settings menu.
X Press % or $ to select the Factory
Setting function.
X Press # .
The function Reset All Settings?
appears in the multifunction display.
X Press % or $ to select Yes or No.
Select Yes if you want to reset to factory
settings.
X Press # to confirm.
The confirmation message appears in the
multifunction display.
The functions of all the submenus will be
reset to factory settings.
Submenus in the Settings menu
X Press ( or & to select the
Settings menu.
X Press % or $ to select a submenu.
The submenus are arranged by hierarchy.
Scroll down with
% , scroll up with $ .
With the selection marker on the desired
submenu, use the
# to access the
individual functions within that submenu.
Once within the submenu, you can use
$
to move to the next function or % to move
to the previous function within that submenu.
The following lists show what settings can be
changed within the various menus. Detailed
instructions on making individual settings can
be found on the following pages.
Instrument cluster submenu
R Selecting speedometer display mode
(
Y page 146)
R Showing or hiding additional
speedometer
9 ( Y page 146)
R Permanent display 10 (speed display or
outside temperature) ( Y page 147)
Time/Date submenu
R Setting the time ( Y page 147)
R Setting the date ( Y page 148)
9 Vehicles with manual transmission
10 Vehicles with automatic transmission
Controls in detail
Z