Mercedes-Benz SL-Class 2008 Owners Manual - Manual (Page 134)

133
Controls in detail
Lighting
Daytime running lamp mode
In Canada the daytime running lamp mode
is mandatory and therefore in a constant
mode.
In the USA the daytime running lamp mode
is deactivated by default. Activate the day-
time running lamp mode using the control
system, see “Setting daytime running lamp
mode (USA only)” (
୴ page 163).
̈ Turn the exterior lamp switch to
position
M or U.
When the engine is running, the low
beam headlamps are switched on.
In low ambient light conditions,
the following lamps will switch on
additionally:
ț Tail and parking lamps
ț Side marker lamps
ț License plate lamps
Canada only:
When the engine is running and you shift
from a driving position to position N or P
with the vehicle at a standstill, the low
beam headlamps will switch off with a
delay of 3 minutes.
When the engine is running and you
ț turn the exterior lamp switch to
position
C, the low beam head-
lamps, the tail and parking lamps, the
license plate and the side marker
lamps switch on.
ț turn the exterior lamp switch to
position
B, the manual headlamp
mode has priority over the daytime
running lamp mode
The corresponding exterior lamps
switch on (
୴ page 131).
i With the daytime running lamp mode activat-
ed and the engine running, the low beam head-
lamps cannot be switched off manually.
i With the exterior lamp switch in
position M or U, you cannot switch on the
high beam headlamps.
The high beam flasher is available at all times.
For nighttime driving you should turn the exterior
lamp switch to position
B to permit activation
of the high beam headlamps.