Mercedes-Benz CLK-Class 2008 COMAND Manual - Manual (Page 92)

92
Rear Audio/Video*
Rear Seat Entertainment (RSE) operation* (except CLK-Class)
RSE comes with a pair of wired headseats
which are correctly matched with the rear
monitor’s amplifier.
A 1/8" socket 2 is located in the button
panel at the front of each monitor. Here
you can connect one headset to each
socket.
̈ Gently push the headset connector into
the socket
2.
Rear monitor, R class illustrated
1 ON/OFF button
2 1/8“ socket
Switching on
̈ Press button 1 on one or both of
the monitors.
or
With the key inserted in the starter switch
in any position (0, 1, 2):
̈ Set the remote control L/R monitor
switch to the side you wish to control.
̈ Press button 9 on the remote
control ( ୴ page 90).
Connecting headsets
i
If you want to use your own headsets,
please use 32 Ohm headsets.
For further information please contact
an authorized Mercedes-Benz Center.
Switching the rear monitor on and
off
i
The RSE system can be switched on
from the monitors regardless of key (in,
out) or starter switch (0, 1, 2) positions.
For an explanation of starter switch
positions, please refer to the vehicle
Operator’s Manual.