Connecting external video sources, Connecting external video sources. 94, 94 rear audio/video – Mercedes-Benz CLK-Class 2008 COMAND Manual User Manual

Page 94

Advertising
background image

94

Rear Audio/Video*

Rear Seat Entertainment (RSE) operation* (except CLK-Class)

The message

Please wait,

loading disc...

will appear on the

rear monitor. It may take a while to
load the data.

After loading, the player plays the
loaded medium and the corresponding
menu will appear on the rear monitor.

Ejecting a CD from the RSE CD/DVD
player

1 CD/DVD slot
2

Eject button

̈

Slide the protective cover open.

̈

Press .

The message

Press any key to

continue...

will appear.

̈

Within 10 seconds, remove the
medium from the slot

1.

The medium will be pulled in again if it
is not removed from the slot within
approx.10 seconds. The RSE CD/DVD
player starts playing the medium again.

After removing the medium, the
message

Drive empty

will appear.

Two external video sources can be
connected to the RSE CD/DVD player via
the video and audio (L - left, R - right)
sockets located on the front panel.

1 Video socket
2 Audio (L - left, R - right) sockets

̈

Gently push the video and audio
connectors of the external video
source into the AUX 1 and AUX 2
sockets

1 and 2.

The external video source is played
back on the monitor switched to the
corresponding AUX source.

Connecting external video sources

i

For instructions on how to operate the
external video sources, please see the
operation manual of the device con-
nected.

!

When not in use, external video
sources should be stored in a safe
location (e.g. one of the vehicle’s
storage compartments) so that they
are not loose within the passenger
compartment during braking, vehicle
maneuvers or a traffic accident.
Objects moving within the passenger
compartment could cause serious
personal injury to vehicle occupants.

Advertising
This manual is related to the following products: