Residual engine heat and ventilation – Mercedes-Benz S-Class 2008 Owners Manual User Manual

Page 477

Advertising
background image

476

Controls in detail

Automatic climate control

dure has begun. The windows and
tilt/sliding sunroof continue closing
until they are fully closed. The indicator
lamp on the button comes on. The air
recirculation mode is activated.

̈

Convenience opening: Press
button

,

for approximately

2 seconds.

The door windows and/or tilt/sliding
sunroof will return to their previous po-
sition. You can release button

,

once the opening procedure has be-
gun. The windows and tilt/sliding sun-
roof continue opening until they have
reached their previous positions. The
indicator lamp on the button goes out.
The air recirculation mode is deactivat-
ed.

Vehicles with panorama roof*

̈

Convenience closing: Press and hold
button

,

until the door windows and

the tilt/sliding panel are closed or have
reached the desired position. The indi-
cator lamp on the button comes on.
The air recirculation mode is activated.

̈

Convenience opening: Press and hold
button

,

until the door windows and

the tilt/sliding panel are opened or
have reached the desired position.

The indicator lamp on the button goes
out. The air recirculation mode is deac-
tivated.

Residual engine heat and ventilation

With the engine switched off, it is possible
to continue to heat or ventilate the interior.
This feature makes use of the residual heat
produced by the engine.

i

A window or tilt/sliding sunroof will only re-

turn to its previous position if it has not been
moved to another position using the respective
window switch or tilt/sliding sunroof switch af-
ter it was closed with button

,.

A window or tilt/sliding sunroof that has been
moved will remain in its current position if
button

, is used to reopen the remaining

windows or tilt/sliding sunroof.

i

If you switch on the residual heat function

when outside temperatures are high, only the
ventilation will be switched on.

୴୴

Advertising