Override switch for rear passenger compartment – Mercedes-Benz S-Class 2008 Owners Manual User Manual

Page 64

Advertising
background image

63

Safety and Security

Occupant safety

If you have not installed a child seat, the
LATCH anchors are hidden by an uphol-
stery cover.

1 Indicates the position of the anchors
2 Anchors
3 Upholstery cover
4 Installation device

̈

Bring the rear power seat backrest* to
its fully upright position (

page 349).

̈

Fold upholstery cover

3 upward.

̈

Turn installation device

4 to a vertical

position so that upholstery cover

3

does not fold down.

̈

Install child seat according to the man-
ufacturer’s instructions.

A rigid connection is established be-
tween the child seat and the body of
the vehicle.

Override switch for rear passenger
compartment

You can disable select functions in the rear
passenger compartment for added safety
(for instance when you have children riding
in the rear passenger compartment).

You can disable the following functions in
the rear passenger compartment:

ț

rear door window operation
(

page 383)

ț

adjustment of front passenger seat
from the rear* (

page 349)

ț

rear center console lighter
(

page 505)

Damaged or impact damaged child seats or

child seat mounting fittings must be re-

placed.

Do not leave children unattended in the ve-

hicle, even if the children are secured in a

child restraint system.

Warning!

G

Vehicles with rear power seats*: Never ad-

just the rear seat position after installing the

child restraint. Adjusting the rear seat posi-

tion after installing the child restraint could

damage the child restraint and/or introduce

undesirable slack or tension into the seat

belt and loosen or misposition the child re-

straint, lessening the effectiveness of the

child restraint and thus increasing the

chance or severity of injury in an accident.

i

The child seat must be firmly attached to the

right and left side anchor fittings.

Make sure the seat belt for the center seat can
operate freely with a child seat installed.

Non-LATCH type child seats may also be used
and can be installed using the vehicle’s seat belt
system. Install child seat according to the manu-
facturer’s instructions.

Advertising