Mercedes-Benz C-Class 2008 COMAND Manual - Manual (Page 76)

75
Video
DVD video
ț After use, replace the discs into the
sleeve.
ț Protect the discs from heat and direct
sunlight.
Some DVDs may not comply with the
NTSC or PAL TV playback standards.
Sound, picture and other playback prob-
lems may occur when you play such DVDs.
As standard, COMAND can play video
DVDs which meet the following criteria:
ț Region code 1 or region code 0 (no re-
gion code)
i
With a video DVD having another region
code, a corresponding message will be dis-
played.
ț PAL or NTSC TV standard
Information on this can usually be found ei-
ther on the DVD itself or on the DVD
sleeve.
i
The factory setting for COMAND is region
code 1. An authorized Mercedes-Benz Center
can change this setting. This will enable you to
play video DVDs with other region codes, provid-
ed that they have been made to the PAL or NTSC
TV standard.
It may be the case that some functions or
actions may not be possible at certain
times, or may not be possible in general,
depending on the DVD.
When you activate such functions or ac-
tions, this is indicated by the
7 symbol in
the display.
̈ Proceed as described in the “Loading
CDs and DVDs” section (
୴ page 54).
̈ Proceed as described in the “Ejecting
CDs and DVDs” section (
୴ page 57).
DVD playback conditions
Functional restrictions
Loading DVDs
Ejecting DVDs