Towing eye bolt, Installing towing eye bolt – Mercedes-Benz M-Class 2007 Owners Manual User Manual
Page 521

520
Practical hints
Towing the vehicle
Installing towing eye bolt
Depending on whether you are towing a
vehicle or you are being towed, the towing
eye bolt can be screwed into threaded
holes which are located behind covers on
the right-hand side of each bumper.
1 Cover
1 Cover
Vehicles with Sport Package*
1 Cover
Removing cover
̈
Press mark on cover
1 as indicated by
the arrow.
Vehicles with Sport Package*:
̈
Pry cover
1 with a screwdriver or
similar tool at point indicated by the
arrow.
̈
Lift off cover
1 to reveal the threaded
hole for towing eye bolt.
Warning!
G
In order to avoid possible serious burns or
injury, use extreme caution when removing
the rear cover, because the rear exhaust
pipe is extremely hot.
i
The cover
1 is secured to the bumper by a
plastic cord.