Mercedes-Benz G-Class 2006 Owners Manual - Manual (Page 156)

155
Controls in detail
Automatic transmission
One-touch gearshifting
Even with an automatic transmission, you
can change the gears manually and limit or
extend the gear range for automatic
shifting with the gear selector lever in
position D.
Downshifting
̈ Briefly press the gear selector lever to
the left in the D– direction.
The transmission will shift from the current
gear to the next lower gear as permitted by
the shift program. This action simulta-
neously limits the gear range of the trans-
mission (
୴ page 154).
Upshifting
̈ Briefly press the gear selector lever to
the right in the D+ direction.
The transmission will shift from the current
gear to the next higher gear as permitted
by the shift program. This action simulta-
neously extends the gear range of the
transmission.
Canceling gear range limit
̈ Press and hold the gear selector lever
in the D+ direction until
D reappears in
the multifunction display.
The transmission will shift from the current
gear range directly to gear range D.
Shifting into optimal gear range
̈ Press and hold the gear selector lever
in the D- direction.
The transmission will automatically select
the gear range suited for optimal accelera-
tion and deceleration. This will involve
shifting down one or more gears.
!
Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.
Shift into reverse gear R or parking
position P only when the vehicle is
stopped.
Warning!
G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced vehi-
cle control. Your vehicle’s ABS will not pre-
vent this type of loss of control.
i
To avoid overrevving the engine when
the gear selector lever is moved to the
D– direction, the transmission will not
shift to a lower gear if the engine’s
max. speed would be exceeded.