Mercedes-Benz G-Class 2006 Owners Manual - Manual (Page 190)

189
Controls in detail
Loading
Folding seat backrest forward
̈ Remove the head restraints
(
୴ page 102).
̈ Pull release lever 1 in direction of ar-
row and fold seat backrest forward un-
til it locks in place.
Folding seat bench forward
̈ Fold seat backrest forward.
̈ Pull release lever 2 in direction of ar-
row and fold seat bench forward to-
gether with the seat backrest.
Returning seat bench and seat back-
rest to sitting position
̈ Fold up seat bench until it locks in
place.
̈ Pull release lever 1 and raise seat
backrest until it locks in place.
̈ Check to make sure the seat is locked
by pushing and pulling on the seat
backrest.
Partition net* (MB Accessory)
Use of the partition net is a particularly im-
portant safety factor when the vehicle is
loaded higher than the top of the seat
backrests with smaller objects.
While the partition net will help protect you
from smaller objects, it cannot prevent the
movement of large, heavier objects into
the passenger area in an accident. Such
items must be properly secured using the
cargo tie-down rings in the cargo compart-
ment floor.
The partition net can be installed behind
the seat backrests of the rear seat bench,
or behind the front seats if the rear seat
bench is folded down.
Warning!
G
Failure to assure that seats and seat back-
rests are locked into place could result in an
increased chance of injury in an accident.
i
Installation can be performed by open-
ing the rear doors.