NUU Wake User Manual

Page 5

Advertising
background image

5

Action Button

The Action button has the Bluetooth symbol embossed into it as well as a Play/Pause icon silkscreened above it .

This button controls:

• Pairing of Bluetooth device

• Play/Pause

• Re-connect

TO PAIR THE WAVE WITH YOUR BLUETOOTH DEVICE:

1.

Switch on the NUU Wave. The Bluetooth Status LED will fl ash slowly.

2.

Press and hold the Action Button for about ~3 seconds. You will hear a double-beep (low-low) and the

Bluetooth Status Light will fl ash quickly. The NUU Wave is now in pairing mode.

3.

Enable Bluetooth on your phone or other device.* Then select “NUU Wave” from the list of discoverable devices.

4.

If prompted for a PIN code, enter “0000” (4 zeros).

5.

It will take between 10-15 seconds for the NUU Wave to pair with your device. When pairing is successful, you will

hear a two-tone (low-high) sound and the Bluetooth Status LED will remain steadily lit.

*NOTE: Procedures for activating Bluetooth will vary across devices. Consult the documentation that came with your

phone or other device for further information.

c

Advertising