Old Town Kevlar Skid Plate Kit - Manual (Page 4)

Skid Plate Kit
Installation
Instructions
125 Gilman Falls Road
Building B
Old Town, ME 04468 USA
800-8-KAYAKS
www.oldtowncanoe.com
Please read kit instructions carefully prior to installation.
Many of our kit installations can be viewed at
www.youtube.com/oldtowncanoeandkayak
Rev.A
Issue Date: 12/08/2010
Doc. # K-01.1331.0640
Page 4 of 5
Step 3: Finishing:
Fig.#8 – Finished Skid Plate

Remove the drip cover and the masking tape after the resin has
gelled enough so that it will not run down the boat. Allow the resin
to cure for 24 hours.

After 24 hours smooth the surface of the skid plate by sanding it
with medium grit sandpaper after it is dry.

Repeat this set of instructions on the other end of the boat with the
remaining can of Hardener and Resin.