Origin Live Sovereign MKI - Manual (Page 2)

2
Introduction (read carefully)
Congratulations on choosing your Origin Live Sovereign turntable. You now have one of the finest sounding turntables available
– not only will it provide an extraordinary level of performance but also reliability and low maintenance.
It is critical that these instructions are read fully to achieve the full performance from your turntable. There are aspects of the
deck that run contrary to what you may expect, so before altering anything it is important to have fully read the manual or
degradation will result.
The Sovereign turntable is simple to set up. If you have a problem please refer to the instructions. If your problem persists you
should speak to your dealer or have a look at the Origin Live web site
www.originlive.com under “general information” then
“technical support” from the drop down list
The instructions are written for people with no previous experience of turntables. Some sections may therefore appear lengthy,
as they need to cater for all potential questions. When reading the instructions refer to the various diagrams for part names and
clarity.
The deck can take approximately 15 minutes to set up depending on your expertise. The dc regulator electronics may initially
encounter speed drift when first started (if they have not been run in) and may need at least 4 hours to run in before the speed
can finally be set with accuracy.
We wish you an enjoyable time with your Sovereign turntable.
Parts list
When you unpack the deck, check that you have all the items listed in the parts list.
 Plinth
 Turntable bag
o Belt
o 1 cable clip and attachment screw (may be on deck)
o Bottle of Oil
o 3mm Allen key
o 2.5 mm Allen key
o 30mm Spacer tube
 Platter
 Sub-platter
 Sub-chassis
 Motor pod, DC200
 Ultra Control box
 Upgrade Transformer for 230 volt or 110 volt mains supply
 Arm (optional)
P A P E R W O R K
 Turntable instructions
 Strobe card