Clarion DXZ378RMP - Manual (Page 25)

Operations Common to Each Mode
English
25
DXZ378RMP/DXZ379RMP
● Setting the dimmer control
You can set the dimmer control “ ON ” or “ OFF ”.
∗ The factory default setting is “ ON ”.
2-1. Select “ DIMMER ”.
3-1. Press the [ w ] or [ z ] button to select “ ON ”
or “ OFF ”.
● Anti-theft indicator
The red Anti-theft indicator is a function for
preventing theft. When the DCP is removed
from the unit, this indicator blinks.
∗
The factory default setting is “ OFF ”.
2-1. Select “ BLINK LED ”.
3-1. Press the [ w ] or [ z ] button to select “ ON ”
or “ OFF ”.
● Setting the external amplifier
∗
The factory default setting is “ OFF ”.
2-1. Select “ A-CANCEL ”.
3-1. Press the [ w ] or [ z ] button to select “ ON ”
or “ OFF ”.
• ON:
Use with connected AMP.
• OFF:
Use with inside AMP.
● Set the cellular phone connection
mode (AUX/CeNET)
You can listen to your telephone calls from the
speakers connected to this unit.
∗
The factory default setting is “ AUX ”.
2-1. Select “ TEL-SEL ”.
3-1. Press the [ w ] or [ z ] button to select
“ AUX ” or “ CENET ”.
• AUX:
AUX input jack in front panel is for cellular
phone audio input, when the AUX input
jack is used to connect an AUX
BLUETOOTH BB (BLT373) (sold
separately).
• CENET:
CENET input cable is for cellular phone
audio input, when a CeNET cable is used
to connect a cellular phone (BLT433 or
TEL-002) (sold separately).
● Setting the car speaker output for the
cellular phone
∗
The factory default setting is “ RIGHT ”.
∗ To output the telephone calls, set the cellular
phone interrupt to “
ON ”.
2-1. Select “ TEL-SP ”.
3-1. Press the [w] or [z] button to select
“ RIGHT ” or “ LEFT ”.
• RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
• LEFT:
Telephone calls can be heard on the front
left speaker connected to this unit.
● Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold cable, you can listen to
your telephone calls on your car speakers.
∗
The factory default setting is “ OFF ”.
2-1. Select “ TEL-SW ”.
3-1. Press the [w] or [z] button to select the
setting. Each time you press the [w] or
[z] button, the setting changes in the
following order:
“ ON ” ↔ “ OFF ” ↔ “ MUTE ”
• ON:
You can listen to your telephone calls from
the speakers connected to this unit.
∗
When listening to your calls on your car
speakers, you can adjust the volume by
turning the [
ROTARY ] knob.
• OFF:
This unit continues normal operation even
when the cellular phone is used.
• MUTE:
The sound from this unit is muted during
telephone calls.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
DXZ378RMP_EN.book 25 ページ ２００６年１１月２７日 月曜日 午後２時２２分