Clarion DXZ378RMP - Manual (Page 31)

English
31
DXZ378RMP/DXZ379RMP
TV Operations
Note:
• The following operations are performed the same
as for radio mode:
∗
Channel selection
∗ Storing channels in memory
∗ Calling channels from memory
∗ Auto store
∗
Preset scan
See “ Radio Operations ” (page 14-15) for details.
TV tuner functions
When an optional TV tuner is connected
through the CeNET cable, this unit controls all
TV tuner functions. To watch TV requires a TV
tuner and monitor.
Watching a TV
1. Press the [ SRC ] button and select the TV
mode.
2. Press the [ BND ] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles
between TV1 and TV2.
3. Press the [ x ] or [ v ] button to tune in the
desired TV station.
Watching a video
The TV tuner has a VTR input terminal to which
1 external device can be connected. Connect a
12 V video cassette player (VCP) or video
cassette recorder (VCR) to the TV tuner input
terminal.
∗ The factory default setting is “ TV ”.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [ x ] or [ v ] button to select “ TV/
VTR ”.
3. Press and hold the [ ] button for 1 second
or longer to set to “ VTR ”.
4. To return to the TV broadcast, press and
hold the [ DISP ] button for 1 second or longer
to switch to the adjustment selection display.
5. Press the [ x ] or [ v ] button to select “ TV/
VTR ”.
6. Press and hold the [ ] button for 1 second
or longer to set to “ TV ”.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [ x ] or [ v ] button to select “ TV
AREA ”.
3. Press the [ w ] or [ z ] button to select the
reception area.
4. Press the [ DISP ] button to return to the
previous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting is “ ON ”.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the adjustment
selection display.
2. Press the [ x] or [v] button to select “ TV
DIVER ”.
3. Press the [w] or [z] button to set to “ ON ” or
“ OFF ”.
• ON:
Sets the diver setting to ON.
• OFF:
Sets the diver setting to OFF.
4. Press the [ DISP ] button to return to the
previous mode.
DXZ378RMP_EN.book 31 ページ ２００６年１１月２７日 月曜日 午後２時２２分