Pridiom Classic Series PMS241CL User Manual - Manual (Page 4)

5 5 6 6
NAMES OF PARTS OPERATING INSTRUCTIONS
NAMES OF PARTS
Indoor unit
3
2
4
1
6 7
5
8. Connective cable
9. Connective pipe
10. Stop valve
Outdoor unit
NOTE: The indoor unit you purchased would like one of the following. There is a slightly
difference on front panel and display window, but the features are the same.
NOTE:
All the pictures in this manual are for
explanation purpose only. Your air
conditioner may be slightly different.
The actual shape shall prevail.
Air inlet
Air outlet
8
9
10
Outdoor unit
Air inlet( rear)
Air inlet (side)
Air outlet
1. Front panel
2. Air inlet
3. Horizontal air flow grille
4. Vertical air flow louver
5. Display panel
6. Connecting pipe
7. Drain hose
Indoor unit
(A)
(B)
(C)
Indication lamp
AUTO indication lamp:
Lights up during the Auto operation.
OPERATION indication lamp:
This lamp illuminates when the air conditioner is in operation.
TIMER indication lamp:
Lights up during Timer operation.
CLEAN AIR indication lamp(optional):
DIGITAL DISPLAY indication lamp:
Displays current setting temperature or malfunction codes when the air conditioner
is in operation.
Displays the room temperature under Fan only mode.
Lights up when CLEAN AIR feature is activated and lonizer can generate abundant
anions to fill the room with refreshing and natural air.
DEFROST indication lamp:(for cooling and heating model only)
This indicator illuminates when the air conditioner starts defrosting automatically
or when the warm air control feature is activated in heating operation.
Follow Me function( ) Optional
To activate the Follow Me feature, point the remote control towards the unit and press the
Follow Me button. T
If the unit does not receive the Follow Me signal during any 7
minute interval, the unit will cancel the Follow Me mode automatically.
he remote display is actual temperature at its location. The remote
control will send this signal to the air conditioner every 3 minutes interval until press the
Follow Me button again.
The remote control serves as a remote thermostat allowing for the precise
temperature control at its location.
Special functions
Anti-mildew function Optional
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on
HEAT mode, the unit will continue operating for about 30 seconds at LOW fan speed. This
will
help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.