QOMO QRF700 User Manual - Manual (Page 146)

3.2.2.4.5 Instructor keypad in sleep mode:
In order to extend the life of the battery, a sleep mode has been implemented.
To use the sleep mode settings for the instructor keypad follow these steps:
1. Under the main menu, select item “4.Setting” to enter into the Settings
submenu.
2. Under the Hardware submenu, select “2.ScreenSaver” submenu in order to set
the duration time before going to the sleep mode.
3. Press the Up /Down Key to adjust and select time.
4. Press the Menu/OK Key to confirm the setting.
Note: If the clicker stays without any interaction for a period of time that set in Screen
Saver, the keypad will enter into a sleep mode which will shut down the screen’s display.
The user can press any key to wake up the keypad and return to the previous display.
3.2.2.4.6 Instructor keypad factory settings:
WARNING: Using this function will clear all user data stored, including all the exam
question contents in the instructor keypad. It is NOT recoverable.
Sometimes it is convenient to clear all data stored in the keypad. This can be done by
simply restoring the factory settings. This is especially useful when you want to trade in
your keypad.
To use the factory settings for the instructor keypad, follow these steps:
1. Under the Normal submenu, select “4. DefaultSet” in the submenu to restore the
factory settings.
2. Press the Menu/OK Key to confirm the operation.
3. Follow the screen prompt, and press the “Del Key” to initialize the setting.
3.2.2.5 Offisite Mode
The instructor clicker will consume more power when it is running in the Offsite mode. The