QOMO QD700 - Manual (Page 14)

WORKING ON THE STAGE
1. Place your material on the working surface.
2. Select the enlargement required with the “ + T ” and “ W ” keys.
3. Adjust the focus with the “Near” and “Far” keys or “AUTO” key.
WORKING OUTSIDE THE STAGE
For showing 3-dimensional objects with the visualizer, just place
them on the working surface and adjust the “ + T ” or “ W ” and
“AUTO” keys. If the object is too big for the stage or you want to show
it from the side, just place it behind or in front of the unit and tilt the
camera by hand (please take off the close-up lens first).
Rotate 330 degrees
vertically
LIGHT
The arm lights are on when the power is on. Each time you press the
“LAMP” buttons, the lighting changes as below.
The arm lights turn on
The back light turns on
14