QOMO QD700 - Manual (Page 15)

All the lights turn off
ADJUSTING IMAGE SIZE
In order to reduce or enlarge the image size displayed on the screen,
press the “ + T ” or “ W ” button.
WORKING WITH NEGATIVES
The visualizer is automatically set to display normal materials on the
screen when the power is on. To display negatives, turn on the
backlight by pressing the “LAMP” key, and then press the “Neg”
button to display the film negatives. Press the “Neg” button again to
display normal materials in the color mode.
FOCUSING
When the Visualizer is turned on the focus automatically adjusts to
the stage, it is not necessary to readjust the focus if you are only
working with flat materials (text, photos, etc.). Only 3D objects
require a focus adjustment.
Press the “AUTO” button to auto focus.
Press the “FAR” or “NEAR” button once to focus manually.
15