Rice Lake RL550-10 Digital Chair Scale Operating Instructions User Manual
Page 19
Digital Chair Scale Operation Manual - RS-232 Communication
15
6. If you want to verify the installation, you can view the driver by looking at the device manager of your
system.
7. To print a ticket using the USB driver, open the software driver (shown above) and the port assigned to
that driver is shown.
8. Ensure that the USB cable is properly connected and the unit is on.
9. Another terminal type program (such as Hyperterminal) needs to be opened and connected through the
USB driver to the indicator to be able to see the information being sent to the PC. A port needs to be
established so select the port that is assigned to Parpar and print the ticket. The following example tickets
will print.
Note
A single print ticket has four spaces after the “patient weight” and only one space between weight and
lb in the examples shown above. Then seven <CR><LF> after.