Rice Lake RL550 Digital Chair Scale Technical and Operating Instructions - Manual (Page 11)

Rice Lake 550 Digital Chair Scale - Scale Assembly 7
9. Place the seat of the seat base and secure it into place using the four (4) M6 x 16 Allen screws.
Secure seat to scale
using four screws
Figure 3-11. Secure Seat to the Scale Using Screws
10. Use level bubble to check for level and adjust feet as needed by adjusting bolts located on top of each
caster wheel.
Bubble level location Adjust bolt located above
caster to adjust bubble
level
Figure 3-12. Bubble Indicates that the Scale is Level
Note
Ensure casters are in a locked position prior to having a patient sit down on the chair scale.
Figure 3-13. Brake Location on Each Caster Wheel
11. Foot rest must be in the UP position prior to patient sitting down on the chair scale. Once the patient is
seated, you can lower the foot rest.
Figure 3-14. Flip Footrest Down