Rice Lake 920i Dual Channel Analog Input Card User Manual
Page 5
5
Use the
left
navigation key to select the A/D, then press the center softkey,
ADD.
The A/D is then moved to the
associated A/D’s column as shown in example 2. If no other A/D’s are listed in the
AVAILABLE A/D’s
column, the
center softkey changes to
Done
, as shown in Figure 8. Press
Done
to exit the Scale Configuration display.
Figure 8 Scale Configuration Displays
Analog Input Configuration
Use the following steps to work down to the ALGIN menu and fully configure the analog input option for the
920i
.
Figure 9 Analog Input Menu
1. Select SCALES from the main menu.
2. Scroll down and select the desired scale input.
3. Select SCALE 1 to set scale 1 configuration.
4. Select ALGIN to select the desired input ranges:
•
Temp
•
20 mA
•
10 V
•
100 mV
•
Therm
5. Press the
Enter
key to temporarily store a highlighted setting.
NOTES:
•
Settings are saved upon pressing the
Save
and
Exit
softkeys upon completion of the configuration and calibration
process.
•
The Restore softkey restores the highlighted input parameter to its previously saved setting. The Default softkey restores
the highlighted input parameter to its default setting.
Thermocouple Type Setup
There are five types of thermocouple probes that are supported by the
920i
. The probe types include Types E, J, K,
N, and T. They are all handled internally by
920i
core software, Version 2.05 and later.
Example 1
Example 2
4$"-&4
4&3*"-
'&"563&
1'03.5
4&5154
%*(*0
7&34
4$"-&
7
4$"-&
$0/'*(
"-(*/
$"-*#3
N7
5)&3.
5&.1
N"
(3"%4