Rice Lake Counterpart Configurable Counting Indicator - User Manual - Version 2.2 User Manual
Page 39
Counterpart User Manual - Configuration
33
Level 5 submenus - Under the Level 4 SCLCHG Feature
REZERO
OFF
ON
Performs a zero function on change.
CHKSTBLE
ON
OFF
When changing scales, a stability check can be either enabled or disabled. If enabled, and the
stability check is successful, no indication is shown and the unit switches to the next scale. If
enabled and the stability check fails, then NON-STABLE is shown on the display and the
switch to the next scale is not made.
XFRTARE
OFF
ON
When changing scales, the tare weight is transferred from the current scale to the new scale.
Units must be set to the same unit of measurement.
XFRUTWT
ON
OFF
When changing scales, the unit weight is transferred from the current scale to the new scale.
Level 5 submenus - Under the Level 4 DATE Feature
DFORMT
MMDDY4
DDMMY4
Y4MMDD
Y4DDMM
MMDDY2
DDMMY2
Y2MMDD
Y2DDMM
Sets the date format. Y4 will use a four-digit year value, such as 2011, while Y2 will use a
two-digit value, such as 11.
D SEP
SLASH
DASH
SEMI
Sets the date separator as a slash, dash, or semicolon.
Level 5 submenus - Under the Level 4 TIME Feature
TFORMT
12 HOUR
24 HOUR
Sets the time format.
T SEP
COLON
COMMA
Sets the time separator as a colon or a comma.
FEATUR Menu
Parameter
Choices
Description
Table 3-5. FEATUR Submenu Parameters (Continued)