Rice Lake Discovery Series Semi-Micro and Analytical, Ohaus - Manual (Page 50)

EN-46 Ohaus Discovery
x% Set % reference weight (x) in grams. (Must have reference weight stored.)
P% Print percent reference weight.
xAW Set Animal Weigh Level to x. (x = 1 (Low), 2 (Medium), 3 (High)
PAW Print Animal Weigh Level.
BAW Begin Animal cycle. (Manual Mode)
CW Clear locked weight (weight < threshold) in Manual and Semi-Auto modes.
xCO Set Checkweighing Over Limit in grams.
xCU Set Checkweighing Under Limit in grams.
PCO Print Checkweighing Over Limit.
PCU Print Checkweighing Under Limit.
PTIME Print current time.
PDATE Print current date.
xAW Set AW Mode, x=A (Automatic), x=S (Semi Automatic), x=M (Manual)
Command Function
5.4.1 Commands (Cont.)
5.4.2 Connections
RS232 Interface
On the rear of the balance, the 9-pin female subminiature “D” connector is provided for interfacing to other devices. The pin connections are
shown in the illustration below.
RS232 Connector
* External PRINT and/or TARE switches may be installed as shown in the diagram. Momentary contact switches must be used. To enable this
feature, contact Ohaus Aftermarket.
RS232 Pin Connections
1 – Remote Tare
2 – TxD
3 – RxD
4 – DSR
5 – Ground
6 – DTR
7 – CTS
8 – RTS
9 – Remote Print
80104130.indd 46 11/7/2006 9:22:46 AM