Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 18)

14 Laser LT Installation and Operation Manual
The Laser LT remote display can be configured using a series of menus accessed from the front panel of the unit as
shown in Figure 3-4.
G/N
B/N
ZERO PRINT UNITS
UNITS
TARE
Figure 3-4. Configuration Setup Buttons
Use the UP/DOWN, LEFT/RIGHT buttons to navigate through menu items and the ENTER button for setting a
selection.
Table 3-1 summarizes the functions of each of the main menus and Figure 3-5 illustrates the main menu selections.
Table 3-1. Laser LT Remote Display Menu Summary
Menu Menu Function Table/Section Number
CONFIG Configuration. Displays brightness and other parameters associated with configuring
the remote display Table 3-2
SERIAL Serial. Configures serial ports Table 3-3 and 3-4
TEST Test. System hardware tests Table 3-5
KEYPAD Keypad. Configures keypad operation and allows the strings sent with each keypad
press to be modified to comply with other manufacterers Section 3.5
DIGIO Digitial I/O. Assigns digital input functions Section 3.6
VERS Version. Displays installed software version number Section 3.7
TEST SERIAL CONFIG VERS KEYPAD DIGIO
Figure 3-5. Laser LT Main Menu Flow