Rice Lake MSI9300 PortaWeigh Crane Scale Setup Exit Guide - Manual (Page 3)

Page 2 of 5
4). Select (1)
Note function change from
Terminal to Host.
5). Press (N) APPLY ALL COMMPORT SETTINGS NOW!
***** Commport 1 Settings *****
(1) Function: Host
(2) Baud rate: 9600
(3) Standard: RS-232
(4) Mode: Duplex
(5) Data bits: 8
(6) Parity: None
(7) Type: MSI
(8) Protocol/Handshake: None
(b) Control: On command
(d) Interval: every 1000 milliseconds
(e) Motion: Enabled
(N) APPLY ALL COMMPORT SETTINGS NOW!
(ESC) Exit
***** Commport 1 Settings *****
(1) Function: Host
(2) Baud rate: 9600
(3) Standard: RS-232
(4) Mode: Duplex
(5) Data bits: 8
(6) Parity: None
(7) Type: MSI
(8) Protocol/Handshake: None
(b) Control: On command
(d) Interval: every 1000 milliseconds
(e) Motion: Enabled
(N) APPLY ALL COMMPORT SETTINGS NOW!
(ESC) Exit
N