Rice Lake Farm Bars - U Series Universal Weighbars User Manual
Page 11
Advertising
Maintenance
7
all weight removed, press
to rezero the scale. This function adjusts the zero and span calibration
values. The indicator displays
*CAL*
while the zero and span calibrations are adjusted. When
complete, the adjusted A/D count for the zero calibration is displayed. Press
to enter the value, then
press to return to the CALIBR menu.
7. Press until the display reads
CONFIG
, then press to exit setup mode.
Note
To perform the calibration using EDP commands or Revolution
®
, consult the indicator operator's manual.
Advertising