Rice Lake Survivor 390HE Hostile Environment Digital Indicator - Manual (Page 38)

34 SURVIVOR 390HE Installation Manual
send the EDP command SEC.MULT=
0.0005<CR> to set the multiplier for the
secondary units.
• Long tons and grains units listed in Table 8-4
cannot be directly specified as primary or
secondary units on the 390HE indicator. For
these or other unlisted units of weight, specify
NONE on the UNITS parameter.
NOTE:
Ensure that the secondary decimal point
position is set appropriately for the scale capacity in
the secondary units. If the converted value requires
more digits than are available, the indicator will
display an overflow message (
OVERFL
).
For example, if the primary units are short tons,
secondary units are pounds, and the secondary
decimal point is set to 8888.88, the indicator will
overflow if 5 tons or more are applied to the scale.
With 5 tons applied, and a conversion factor of 2000,
the secondary units display needs five digits to the left
of the decimal point to display the 10000 lb secondary
units value.
Primary Unit x Multiplier Secondary Unit
grains 0.06480 grams
0.00229 ounces
0.00014 pounds
0.00006 kilograms
ounces 437.500 grains
28.3495 grams
0.06250 pounds
0.02835 kilograms
pounds 7000.00 grains
453.592 grams
16.0000 ounces
0.45359 kilograms
0.00050 short tons
0.00045 long tons
0.00045 metric tons
short tons 2000.00 pounds
907.185 kilograms
0.89286 long tons
0.90718 metric tons
grams 15.4324 grains
0.03527 ounces
0.00220 pounds
0.00100 kilograms
kilograms 15432.4 grains
35.2740 ounces
1000.00 grams
2.20462 pounds
0.00110 short tons
0.00098 long tons
0.00100 metric tons
metric tons 2204.62 pounds
1000.00 kilograms
1.10231 short tons
0.98421 long tons
long tons 2240.00 pounds
1016.05 kilograms
1.12000 short tons
1.01605 metric tons
Table 8-4. Conversion Factors