Cortelco Colleague 2205 - Manual (Page 6)

T
ELEPHONE
U
SAGE
TELEPHONE SET UP
1. Use the new line cord to connect the PHONE jack of your new phone to the modular
wall jack.
2. Remove plastic insulator from the battery compartment located under the directory
card to allow proper functioning of the battery.
3. Place the unit on a flat table or mount it on a wall. If you desire to place it on a wall,
use the wall mount bracket and short line cord supplied to accomplish the wall
mounting.
CALLER ID SET UP
Caller ID - Line 1
Use the new line cord to connect the PHONE jack of your new phone to the modular
wall jack. Use the additional line cord to connect the Caller ID Jack to the Modular Wall
Jack using a duplex modular adaptor. Caller ID will receive Caller information from
Line 1.
4
Modular
Wall Jack
Telephone Line
Modular
Wall Jack
Caller ID
Telephone Line