Cortelco Colleague 2205 - Manual (Page 9)

7
Wall
Desk
Wall Mounting
Bracket Position
Wall Jack
Mounting Views
Wall
Jack
Desk Top
Position Wall Mount
Position
WALL MOUNT INSTRUCTIONS
1. Install wall mount bracket in wall mount position and route cords as shown in diagram
below.
2. Connect the line cord. See Step 1 on preceding page for specific instructions.
3. Push out the handset hook and reattach in opposite direction for the wall mount
position, plug the coiled cord into the handset, and then plug the other end of the cord
into the base.
4. Place the handset on the base.
TELEPHONE INITIALIZATION
Lift the handset to allow telephone initialization and listen for dial tone. When you hear
dial tone, your telephone is ready to use. If you do not hear dial tone, repeat this process
to obtain dial tone.