Rice Lake TradeRoute HL Series - Installation Checklist User Manual
Trade route, Installation checklist
July 23, 2013
156640
TradeRoute
™
Installation Checklist
Prior to having your order placed with Rice Lake Weighing Systems for a
Trade
Route
Onboard Scale System,
please have your installer or installing engineer review the following checklist to confirm the scale modules are
suitable for the truck and frame involved, and hydraulic system and operator issues are answered.
Use RLWS Dimensional Drawings on our Catalog Page and website link to confirm all module and electronics
dimensional positioning:
1. Scale Capacity Selected
Reconfirm the correct scale capacity selected.
The capacity of the scale model must always be greater than or equal to the sum of (A) the empty weight of the
body plus (B) the maximum payload hauled by the vehicle. A + B
≤
Capacity.
2. Chassis Rail Width
The
Trade
Route
module is built for standard truck chassis widths of between 33.5 to 35 inches (85 to 89 cm),
outside-to-outside. Is your vehicle chassis in a different width range?
Note
Spacer plates can be used to fill small gaps in chassis widths.
Figure 1. Chassis Rail Width