Sage Smart Toast BTA820UK/BTA840UK - Manual (Page 14)

13
PAge heAder..... oPerATIng yoUr neW APPlIAnCe
defroST BUTTon
This feature activates additional toasting
time required to toast frozen bread.
To toast frozen bread:
1. Place the bread into the toasting slots.
2. Select the desired browning setting
by adjusting the browning control
slide on the front of the toaster. The
browning settings range from '1'
(lightest) to '5' (darkest).
3. Press the TOAST/CANCEL button
and the surround will illuminate in
red then press the DEFROST
button and the surround will
illuminate in white. The bread
will automatically lower into the
toasting slots. The toasting time will
automatically increase.
4. The QUICK LOOK™ button
surround will illuminate in white
allowing you to check on the
toasting progress and, if necessary,
cancel the cycle by pressing
TOAST/CANCEL button when the
desired toast colour is achieved.
Approximately 10 seconds before
the end of the selected browning
setting, the QUICK LOOK™ button
will cease illumination.
5. As the toasting stops and the
carriage rises, the TOAST/CANCEL
button surround will flash and the
LED toasting progress indicator
will cease flashing. The LED
toasting progress indicator will
re-illuminate to the previously
selected browning setting.
6. Once the toasting cycle has finished
and the carriage has risen and locked
into the raised position, the toast
ready alert will sound. Remove the
toast. The TOAST/CANCEL button
surround will re-illuminate in white
for up to 30 seconds, ready for the
next toasting cycle. The DEFROST
button surround will remain
illuminated and should be pressed
once to cancel if a subsequent
toasting function is required.
The DEFROST button surround
will cease to illuminate after 30
seconds or when the appliance is
switched off at the power point. The
DEFROST button works for frozen
crumpets as well.
QUICK looK ™ BUTTon
This feature automatically raises and lowers
the carriage so you can check progress
without interrupting and/or cancelling the
toasting cycle.
To select this feature:
1. 1. The QUICK LOOK™ button
surround will illuminate in white during
the toasting cycle and when using the
A BIT MORE™ feature. You can press
the QUICK LOOK™ button during
toasting cycle to view the toasting
progress. If selected, the QUICK LOOK™
button surround will flash. The LED
toasting progress indicator will cease
to flash indicating that the selected
toasting cycle time has not been
interrupted. When the QUICK LOOK™
cycle has finished, the toasting cycle
will re-commence, indicated by the
resumed flashing of LED toasting
progress indicator.
2. Approximately 10 seconds before
the end of the selected browning
setting, the QUICK LOOK™ button
will cease illumination and cannot
be activated in this time.