Casio LD50 - Manual (Page 13)

E-11
■ Phones/Output Jack
Before connecting headphones or other external equipment, be sure to first turn down the volume settings of
the digital drum and the connected equipment. You can then adjust volume to the desired level after
connections are complete.
Rear Panel
LEFT RIGHT
AUX IN or similar terminal
of audio amplifier
White Red PIN plug
Standard plug
PHONES/OUTPUT Jack
Keyboard amp,
guitar amp,etc.
1
2
3
Connecting Headphones (1)
Connecting headphones cuts off output from the digital drum’s built-in speaker, so you can play even late at
night without disturbing anyone.
Audio Equipment (2)
Connect the digital drum to an audio equipment using a commercially available connecting cord with a
standard plug on one end and two PIN plugs on the other end. In this configuration, you normally set the
input selector of the audio equipment to the terminal (usually marked AUX IN or something similar) where
the cord from the digital drum is connected. See the user documentation that comes with your audio
equipment for full details.
Musical Instrument Amplifier (3)
Use a commercially available connecting cord to connect the digital drum to a musical instrument amplifier.
❚ NOTE
• Be sure to use a connecting cord that has standard plugs on the ends you connect to the digital drum and
amplifier.
Connection Example
Connections
■ Accessories and Options
Use only the accessories and options specified for this digital drum. Use of non-authorized items creates the
danger of fire, electrical shock, and personal injury.
Keyboard or guitar amp
To digital drum’s
PHONES/OUTPUT
jack
Standard plug
INPUT
272A-E-013A
02.10.28, 11:19 Page 11