Casio LD50 - Manual (Page 16)

E-14
272A-E-016A
This section provides the most basic information you need to get your Digital Drum running.
■ Getting Ready
To turn power on and off
Slide the POWER switch to turn power on and off.
■ Adjusting the Main Volume
The main volume controls overall volume, including non-drum sounds, background drum sounds, the sounds
of the four pads, and sound effects.
1.
Press the MAIN VOL. button.
2.
Rotate the dial left to decrease main volume, or right to increase it.
• You can set the main volume in the range of V0 (mute) to V9. The initial default setting is V7.
3.
After you are finished, you can press another button to change to another mode.
■ Playing the Demo Song
The demo song provides you with a demonstration of the various capabilities of your Digital Drum.
To start demo song play
1.
Press the DEMO button.
• You can stop demo tune play by pressing the DEMO button.
2.
To exit the demo song, press START/STOP.
• The following shows the default settings during demo song play.
Basic Operations
Mute icon (Flashes when the MAIN VOL. Setting is “V0: Off.”)
Item Default Setting
Drum Set A0 : Auto
LIGHTING GUIDE SYSTEM Mode F2 : Dual Light
Play Level L0 : Off
Main volume screen indicator
Current main volume setting
Flashing dial icon
Drum animation indicating current LIGHTING GUIDE
SYSTEM mode (This example indicates Lesson Mode.)
02.10.28, 11:19 Page 14