Snow Joe iON8PS 40-Volt Cordless 8-Inch Pole Chain Saw - Manual (Page 8)

8
Know Your Cordless Pole Chain Saw
Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration
below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Technical Data
Battery Voltage* 40 V D.C.
Battery Capacity 4.0 Ah
Charging Time 2.5 – 3 hours (for full charge)
Battery Run Time 25 – 40 min
No Load Speed 1,800 rpm
Bar Chain Length 8 in. (203 mm)
Cutting Thickness (max) 7.1 in. (180 mm)
Multi-Angle Head 0º or 30º
Telescopic Shaft 6.2 ft to 9.8 ft
(1.9 m to 3 m)
Overhead Reach 15 ft (4.6 m)
Oil Tank Capacity 1.7 fl oz (50 ml)
Weight (pole chain saw alone) 8.2 lbs (3.7 kg)
Weight (pole chain saw with battery installed) 10.8 lbs (4.9 kg)
tighten
rel eas e
30º
0º
*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.
1. 8 in. (203 mm) Oregon guide bar
2. 8 in. (203 mm) Oregon chain
3. Oil tank cap
4. Ring nut
5. Chain tension adjustment knob
6. Chain/sprocket end cover
7. Oil level indicator window
8. Multi-angle head adjustment dial 9. Cutting bar sheath
10. Cam-lock nut
11. Cam-lock
12. Telescopic pole
13. Front handle foam grip
14. Safety lock switch
15. Rear handle
16. Trigger switch
17. Battery compartment
18. Push button for battery indicator
19. Battery indicator
20. Push lock button
21. EcoSharp
® lithium-ion battery (iBAT40)
22. EcoSharp ® battery charger (iCHRG40)
This picture is from
the opposite side of
this illustration
1
5
9
6
11
13
12
16
17
18
19
20
21
22
2 3 4
10
14
15
7 8